关于KMPDM
产品目录
联系我们
你现在的位置:首页
 > 公司新闻

SDT/IMCS Sherlog 船舶行业舱口盖密封试验培训通知


SDT/IMCS Sherlog 船舶行业舱口盖密封试验培训

Sherlog training Training information&agenda
Registration form
Certified operators List of the marine "CertifiedSurveyors/Operators" SDT/IMCS Sherlog Training


Terms and conditions
SDT International S.A. organizes a series oftheoreticalandpractical training sessions to allow delegates tobecome"CertifiedOperator qualified for ultrasonic hatch covertightnesstestingwith the Class Type Approved Sherlog TA " in compliance with theIACSURZ.17. Practical details of the SDT-IMCS Training Program,whichisaccredited by the Nautical Institute, can be foundhereafter.

Training Program:
SDT International determines its training program in order tomeetasclosely as possible the industry's demand. Hence, thebelowlistedtraining course dates and locations are subjecttomodification anddepend on the number of theregisteredparticipants.

Upcoming training locations:
Antwerp 02, 03 & 04/02/2011 Fully booked
Dalian (China) 15, 16&17/02/2011 In-house/Registrationsubjecttoavailability
New-York 15, 16 &17/03/2011Hotel to be confirmed
Singapore 05, 06 & 07/04/2011 Hilton - Orchard Road
Athens 17, 18 & 19/05/2011 Hilton-Vassilissis Sofias Avenue
Antwerp 14, 15 & 16/09/2011 Hilton Groenplaats

Venues:
For the comfort of the trainees, and in order toensurecompliancewith the accreditation standards, training courseswillbeorganized in hotels of good international standard.

Training Session Agenda:
The theoretical and practical on-board training was developedinaway to cover all the required topics under IACS UR Z17 asmuchaspossible, and yet to be concentrated in a 2 ½ daytrainingcourse.Therefore SDT has decided to forward, upon receiptof thetrainingfee, the complete syllabus of the training course bye-mailto eachregistered delegate. In addition to the trainingsyllabus,each ofthe delegates will also receive the wellillustrated "HatchCoverInspections" book, published by the NauticalInstitute in 2003atthe commencement of the training course. Thepurpose is toallowall candidates to become fully acquainted withthe manysubjectsand issues covered by the training course,preparethemselves forthe training and have relevant backgroundinformationat handduring the execution of their day-to-dayactivities.

Training Agenda: Day 1
08.45 - 09.00 Registration & morning coffee
09.00 - 09.15 Welcome and introduction to the training course
09.15 - 10.30 Purpose of the training, hatchcoverrelatedrules/regulations
10.30 - 10.45  Coffee break
10.45 - 12.30 Claims as a result from wetting damage,whyinspectinghatch covers, hatch cover vocabulary, Ro-Rotightnessissues
12.30 - 13.00 Sandwich lunch
13.00 - 15.00 Preparing for survey, differenttestingmethods,evaluation of test results, reporting, dealing withtheship'sstaff
15.00 - 15.15 Coffee break
15.15 - 18.30 Hatch cover types and design, hatchcovermaintenanceand frequently seen problems/deficiencies hatchcoverdefect slides(approx. 200 slides), free debate andQ&A.
18.30 End of day 1

Training Agenda: Day 2
08.45 - 09.00 Registration & morning coffee
09.00 - 10.30 Introduction to ultrasound technology,ultrasonicleaksand leak detection on board. Introduction to theClass TypeapprovedSherlog TA and its applications
10.30 - 10.45 Coffee break
10.45 - 12.30 The different Sherlog TA testing modes(Measuringfunction,Memorizing function)
12.30 - 13.00 Sandwich lunch
13.00 - 15.00 The dedicated hatch cover tightness testingsurveymodeData logging and data transfer to PC for reporting
15.00 - 15.15  Coffee break
15.15 - 18.00 Practical exercise on board
18.30 End of day 2

Training Agenda: Day 3
08.15 - 08.30 Registration & morning coffee
08.30 - 09.00 Debriefing of practical exercise,usingultrasonicequipment on board, Q&A
09.00 - 11.00 Examination
11.00 - 11.15  Coffee break
11.15 - 12.00 Debriefing of examination, correction ofexaminationinclass
12.30 Closing remarks - End of training

Certification:
Upon completion of the complete course andexaminations,eachsuccessful participant will receive the"CertifiedOperatorqualified for ultrasonic hatch cover tightnesstesting withtheClass Type Approved Sherlog TA ". SDT Internationalissuesthiscertificate within the three weeks following the dateofthetraining course. The name and coordinates of thenewlyqualifiedoperators are added to the "List of CertifiedOperators".Theoperator's certificate is valid for 3 years and canbe renewedbysuccessful passing of an e-examination prior to theexpiry dateofthe operator's certificate.

Practical training details:
Participants to a training course will be advised aboutthetrainingcourse venue and useful practical details about 1weekbefore thetraining date.
Participants are required to bring the training coursesyllabustothe training.
Each participant who follows the complete 2 ½ daytrainingwillexercise and get trained on an individual Sherlog TA instrumentprovided bySDTInternational for the duration of the trainingsession.
Coffee breaks and luncheons during the training are includedinthetraining fees.
Transport to and from the vessel on board of whichthepracticaltraining is organized and is free of charge.
In order to comply with safety regulations duringthepracticaltraining session on-board, participants arekindlyrequested tobring along their helmet, overall, safety shoesandgloves.
Language:
Language of the training, syllabus, course documentationandthewritten examination is English. All trainees arethereforeexpectedto have a good working knowledge of the Englishlanguage.

Registration:
The complete 2 ½ day training session is organized for a minimumof7trainees and a maximum of 12 in order to guarantee anoptimalandefficient training.
All registration applications must preferably be enteredthreeweeksprior to training date, this in order to allowon-timeshipping ofthe training course material. Last minuteregistrationsareconsidered on a case-by-case basis.
Registrations are made on a first entered (and paid),firstbookedbasis.
SDT International, unless otherwise agreed, will onlyconsiderareservation as definite after receipt of the trainingfeepayment.For that purpose, participants are kindly requested tousetheTraining Registration Form.
Hotel Accommodation:
Participants are free to stay in a hotel of their ownchoice.Roomreservation is to be made by the delegates and is notincludedinthe training fee.

Travel Arrangements:
Venues are generally selected in centrally located areasthatcaneasily be reached by plane.
Travel arrangements are to be made by the delegates andarenotincluded in the training fee.

Training Session Cancellation:
SDT International reserves the right to cancel any ofthescheduledtraining courses. In that case the training sessionwillbere-programmed and the training fees fully reimbursedortransferredfor another training session at the request oftheparticipant.

Training Fees:
∗ Fees for the complete 2 ½ day training courseandCertification:970 € per delegate. This all-in fee includesrequiredtrainingequipment and material, individual ultrasonictrainingequipment Sherlog TA for each participant fortheduration of the trainingcourse, the training coursesyllabus"Generic Training Program for Service Suppliers EngagedinUltrasonic Tightness Testing", thebook "Hatch CoverInspections"(Nautical Institute), coffee breaks,luncheons and theissuing ofthe Certificate of Qualification.

Copyright© 2003-2018  昆山祺迈测控设备有限公司版权所有

全国咨询热线:400-628-9668        总机:0512-50333915

               
苏ICP备10003596号-3
  

苏公网安备 32058302001682号